especially suitable for wet surfaces – e.g. screed
In Stock - order NOW
With H-Set
The H-Set supplied has 5x350mm interconnecting extension rods, which can be used to extend the reach of your nivcomp to allow you to take measurements from different heights and /or depths. There is also a screw-on magnetic tip, which can be connected to the rods - top or bottom - to attach the nivcomp to any suitable horizontal surface for freehand use.
The nivcomp is a modern and maintenance-free application of the traditional hose leveling instrument, where the inspection glass is replaced by a sensor module with direct altitude indication in millimeters (or inches). Problem free measuring for unevenness of surfaces and gradients as well as across obstacles where the line of sight is blocked.
The handheld device contains the sensing technology for the acquisition of the altitude difference to the reservoir in the hose reel. The hose reel, with pressing screw and indicator module, contains the liquid reservoir which forms the point of reference during leveling. In order to transmit a level to another point, simply line up the handheld device against this level and save it as zero-reference per keystroke. Every following change in altitude of the handheld device is indicated in millimeters (or inches) as well as with the direction (arrows or +/-). This applies to every point within the radius of 24 metres to the hose reel. The patented recording of the liquid’s temperature makes optimal results possible, even in case of applications outdoors (complying with the respective directions). The solid and double-walled PP-case, with space for optional accessories, guarantees easy hose pull-out and rewinding.
FEATURES
No line of sight required
LC display on handset.
Owner calibration mode.
Auto switch-off after 30 minutes.
especially suitable for wet surfaces – e.g. screed
measurements from different heights and /or depths
SPECIFICATIONS
reproducibility (inside, typical) ± 2 mm at a maximum measuring point distance of 48 m
vertical outreach ± 2.5 m (± 4.0 m)
altitude indication mm / Inch
resolution 1 mm (sign character 0.3 mm)
temperature range of application about 0 ... +35 °C
battery handheld device 1 x AA (alkaline) 1.5 V
energy requirement/operating time ~ 10 mW / > 250 h
dimensions 450 x 420 x 150 mm
weight about 5.5 kg
certificates CE, FCC, conforming with RoHS
low-emission in accordance with the EMC-product-standards
APPLICATIONS
Floor screed work
Floor work
Applications without intervisibility
Check of uneven surface
Paving works
Terracing
Dry lining
Electrical installation
Carpentry
With H-Set
The H-Set supplied has 5x350mm interconnecting extension rods, which can be used to extend the reach of your nivcomp to allow you to take measurements from different heights and /or depths. There is also a screw-on magnetic tip, which can be connected to the rods - top or bottom - to attach the nivcomp to any suitable horizontal surface for freehand use.
